歡迎進入一品儀器設備有限公司網站!
一品儀器 - 產品展示
yipin instrument-Products
4新聞中心
您的位置:首頁  ->  新聞中心

Table 3 The actual temperature measurement and humidity value table of each space intermediate temperature detection point


?Table 3 The actual temperature measurement and humidity value table of each space intermediate temperature detection point

?Temperature setting: 85 °C Indication: 84.7 °C ~ 85.2 °C

Humidity setting (2) 85 %RH indication: 83.3%RH ~86.4%RH(B)

Detection point location

Measured value

Upper deviation

Lower deviation

 

Detection point location

Measured value

Upper deviation

Lower deviation

upper  layer

A

84.9

0.0

-0.1

 

When 85%RH

A

+1.2

-1.2

B

84.9

0.0

-0.1

 

 

C

85.1

+0.1

0.0

 

 

 

 

 

 

Description:

The measured value is the median of 15 consecutive measurements.

The upper deviation is the highest value of 15 data

The lower deviation is the lowest value of 15 data

The test point concludes:

Temperature uniformity: ±2 °C

Humidity fluctuation: ±5% RH

Temperature fluctuation: ± 0.3 °C

D

85.2

+0.2

0.0

Middle  layer

O

84.9

0.0

-0.1

Lower layer

E

84.8

0.0

-0.3

F

84.8

0.0

-0.3

G

84.8

0.0

-0.2

H

84.7

0.0

-0.3

Overall conclusion:

The main technical indicators of the temperature equipment meet the corresponding technical requirements, meet the factory technical standards, and are allowed to leave the factory.

 

Additional information:

1. When the measuring body is in the air, the machine is running normally under no-load condition.

2. The position of each temperature detection point, the upper test point is 10cm away from the top wall, the lower test point is 10cm away from the bottom wall, the upper and lower points are 10cm away from the box wall, the center point, and the humidity measurement point is the geometric center point of the box work space.

3. Each test point is the highest temperature point of the equipment, the intermediate temperature point and the lowest temperature point for performance testing. The humidity measurement is the humidity of the intermediate temperature.

4. The above measured data is the data measured after the temperature reaches the set value for the first time and stabilized for 30 minutes, and is recorded continuously for 15 times. That is, it is measured once every 2 minutes, and 15 times are me

[返回]   
下一篇:Test Results
Copyright ? 2017 東莞市一品儀器設備有限公司 版權所有 本站素材及相關資源均來源互聯網,如有侵權請速告知,我們將會在24小時內刪除*【Gmap】 訪問量:后臺管理 粵ICP備16117078號
服務熱線
0769-84393814
產品符合ISO、ASTM、DIN、EN、GB、BS、JIS、ANSI、UL、等國際測試標準
專注試驗設備多年
關閉
點擊這里給我發消息
在線咨詢
點擊這里給我發消息
技術咨詢
老司机福利-老司国产精品免费视频-老司机精品线观看视频-老司机在线精品视频网站